Variational Mode Decomposition for Rotating Machinery Condition Monitoring Using Vibration Signals

The failure of rotating machinery applications has major time and cost effects on the industry.Condition monitoring helps to ensure safe operation and also avoids losses.The signal processing method is essential for ensuring both the efficiency and accuracy of the monitoring process.Variational mode decomposition(VMD)is a signal processing method which decomposes a non-stationary signal into sets of variational mode functions(VMFs)adaptively and non-recursively.The VMD method offers improved performance for the condition monitoring of rotating machinery applications.However,determining an accurate number of modes for the VMD method is still considered an open research problem.Therefore,a selection method for determining the number of modes for VMD is proposed by taking advantage of the similarities in concept between the original signal and VMF.Simulated signal and online gearbox vibration signals have been used to validate the performance of the proposed method.The statistical parameters of the signals are extracted from the original signals,VMFs and intrinsic mode functions(IMFs)and have been fed into machine learning algorithms to validate the performance of the VMD method.The results show that the features extracted from VMD are both superior and accurate for the monitoring of rotating machinery.Hence the proposed method offers a new approach for the condition monitoring of rotating machinery applications.     

一种基于求解椭圆型方程的结构动网格生成方法

基于椭圆型网格生成法,实现了一种简单高效的贴体结构动网格生成方法,可用于具有移动边界问题的非定常流动数值模拟。该方法提出,在网格变形过程中,Poisson方程需要的控制网格间距和正交性的源项可以通过提取已知的静态网格源项直接得到,并在整个动网格生成过程中保持不变。因此,在椭圆型网格生成中需要通过外迭代确定源项的过程可以得到省略,而且该方法不需要人工指定参数。这使得方法具有高效和易于嵌入到已有程序中的特点。数值模拟结果证明,采用这种方法获得的网格能够较好地保持静态网格原有的正交性和光滑性,在相同迭代步数约束下,网格求解效率低于传统弹簧模拟法,但鲁棒性优于弹簧模拟法。     

湍流控制屏声学校准及校准精度影响因素

湍流控制屏（TCS）是航空发动机风扇噪声试验必备的试验设施。由于湍流控制屏的作用,风扇前传噪声向远场传播时会产生传递损失。通过对湍流控制屏的声学校准,可以获取湍流控制屏的声学修正量,从而实现对风扇前传噪声的修正。本文结合实际工程应用条件,分析了湍流控制屏重复安装的位置精度、校准声源重复性、稳定性、校准声源位置偏差、温湿度修正等因素对湍流控制屏声学修正量精度的影响;结合上述影响因素,对湍流控制屏160 Hz~40 kHz的声学修正量的特征进行分析,总结工程应用中湍流控制屏高精度声学校准的注意事项,提出湍流控制屏的声学校准应包含测量不确定度。     

带有引诱角色的多飞行器协同最优制导方法

考虑我方高价值飞行器面临对方拦截器拦截时,发射两枚防御器对拦截器进行拦截的情形。针对对方拦截器采用扩展比例导引律,在4个飞行器均具有一阶线性动力学特性假设下,基于最优控制理论设计了能在拦截末端施加相对拦截角的显式协同制导律。显式协同制导律将高价值飞行器和两枚防御器三者的协同考虑在内,给出了三者最优控制输入的解析解。仿真结果表明,设计的制导律能使两防御器成功拦截敌方拦截器,且在拦截末端施加一个相对拦截角。通过与只考虑两防御器协同的隐式协同制导律进行比较,可发现显式的协同制导律在控制要求和能量消耗上,要优于隐式的协同制导律。此外,还验证了在不同发射条件下的协同制导律的稳定性。     

SF6分解气的近红外在线检测技术研究

为满足SF6绝缘电气设备故障监测与预警的实际需求,分析了国内分解气检测研究现状.对比近红外与中红外吸收光谱检测技术,提出近红外吸收光谱技术在线检测的技术方案.计算分析待测气体特征谱线的吸收系数、吸收光程和电路信噪比对精度的影响,完成系统参数设计.提出SF6分解气在线检测系统方案,实现对H2S、HF和CO这3种气体测量.数据分析表明,系统检测精度优于5×10-7,表明该系统满足电力行业在线测量的需求.     

利用机载GNSS-R的有效波高反演技术

采用自主研发的多源多宿GNSS-R(Global Navigation Satellite System-Reflections,全球导航卫星系统反射信号)海洋环境遥感探测系统,在天津渤海湾特定区域进行了3次机载校飞试验,获得了大量有效GNSS-R信号数据,对自然条件下的海面有效波高进行了反演处理。该系统通过对接收的GNSS直达信号和海面反射信号进行相关运算处理,可以获得DDM(Delay-Doppler Mapping,时延—多普勒映射)图谱,再利用DCF(Derivative of the Correlation Function,相关函数的导数)在DDM图谱基础上进行相关功率波形的计算,进而通过计算DCF的函数波形宽度得到海面有效波高,验证了该方法的可行性。该方法具有全天时、全天候、高分辨率、低成本等优点,对全球范围内中小尺度海洋状态和物理现象的监测具有重要意义。     

数据采集系统直流增益和线性度的精确评价

介绍了两种新的精确评价数据采集系统的直流增益和线性度的方法与过程,即“按码精确评价法”和“定间距（为量化误差整数倍）精确评价法”。同时讨论了介绍了的优缺点及应用。     

气体注入压力激励法测量卫星液体推进剂剩余量的热力学模型

通过对气体注入压力激励法测量卫星液体推进剂剩余量系统的详细热力学过程分析,建立了能满足实际测量需求的等温和绝热两种热力学模型,对具体测量模型的选用及相关问题进行了分析。     

数据采集系统动态特性的总体评价

数据采集系统动态特性的辨识和评价，是其总体性能评价中至关重要的一个目标。本文通过选取几个相互比较独立的指标来总体描述数据采集系统的动态特性，然后通过几个特殊的模型化方法将其动态特性分别以动态有效位数、传递函数、阶跃响应曲线和幅频特性、相频特性的方式给出，从而解决了数据采集系统动态特性的总体评价问题。     

Structure and kinetic properties of slow-mode shocks associated with magnetic reconnection in the near-Earth magnetotail

We study the structure and kinetic properties of slow-mode shocks near the plasma sheet boundary layer (PSBL) associated with magnetic reconnection by Cluster observation. The presence of slow-mode shocks is confirmed by traditional Rankine–Hugoniot (RH) analysis and Monte-Carlo shock fitting method. The Walén analysis, applied to the tailward flow associated with slow-mode shocks, also supports that plasma was accelerated across a Petschek-type slow-mode shock connected to the diffusion region. Back-streaming ions were observed on the shock layer, and cold ions were accelerated and heated by slow-mode shocks. In addition, whistler and electrostatic solitary waves were observed around the slow-mode shocks. These waves might be excited by the observed field-aligned electron beams near the shocks.